1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Worth Saving This Steering Box?

Discussion in 'Early CJ5 and CJ6 Tech' started by garage gnome, Jun 1, 2020.

  1. garage gnome

    garage gnome ECJ5 welder

    I have this rusted out junk f350 from the late 60's early 70's. I already pulled the T18 from it, but I don't know if I should save this steering box. Its a manual one, but I think its the right one for the reverse ford steering in the jeeps. Sorry for the terrible pic.

    [​IMG]
     
    garage gnome, Jun 1, 2020
    #1
  2. jeepdaddy2000

    jeepdaddy2000 Active Member

    The sector shaft is too long, pushing the body of the box above the frame. The Saginaw box (power or manual) is a simpler, easier, and cheaper swap.
     
    jeepdaddy2000, Jun 1, 2020
    #2