1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

3d Printed Hood Rests

Discussion in 'Early CJ5 and CJ6 Tech' started by Stano316, Apr 30, 2020.

  1. Stano316

    Stano316 Member

    Hello Everybody,

    Had a little time today, and decided to print up some hood rests for my windshield...the print quality is low, I decided to do some real fast prints just to get them done. Also was too lazy to change the filament color. I like them so I will most likely put in some black filament, and jack up the quality so then they come out real nice.


    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    Stano316, Apr 30, 2020
    #1
    V6CJ5, mike starck, ITLKSEZ and 1 other person like this.
  2. termin8ed

    termin8ed I didn't do it Staff Member

    Thats one way to do it(y)
    Do they bolt over the stock standoffs or replacing them?
     
    termin8ed, Apr 30, 2020
    #2
  3. Stano316

    Stano316 Member

    I didn’t have the stock ones, so they bolted right into place
     
    Stano316, Apr 30, 2020
    #3
  4. Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    :beer:
     
    Howard Eisenhauer, Apr 30, 2020
    #4
  5. OzFin

    OzFin Vintage Jeep Guy

    Nice !
     
    OzFin, Apr 30, 2020
    #5
    Stano316 likes this.