1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Dana 18 Rebuild: How Many Shims?

Discussion in 'Early CJ5 and CJ6 Tech' started by Ns0mniac, Mar 23, 2020.

Page 2 of 2
  1. scott milliner

    scott milliner Master Fabricator

    Last pack I opened the shims were stuck together from packing oil. I had to look close to see it.
     
    scott milliner, Mar 26, 2020
    #21
    Mark T. likes this.
  2. justin_bongo

    justin_bongo Member

    I think in all, I used 12 or 13. All same thickness. Very thin. I found my old shins after the fact, and there was a really thick one, a couple in the middle, and 1 thin one, but they were toast. So I think mine worked out about the same.
     
    justin_bongo, Mar 28, 2020
    #22
    Mark T. likes this.
  3. Ns0mniac

    Ns0mniac Member

    Got it shimmed and put back together finally! The NOS shim pack worked out much better.
     
    Ns0mniac, Mar 28, 2020
    #23
    Mark T., justin_bongo, Rich M. and 1 other person like this.
Page 2 of 2