1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Proportioning Valve?

Discussion in 'Roxor Tech' started by Dgroshek, May 2, 2019.

  1. Dgroshek

    Dgroshek Member

    Does the Roxor's brake master cylinder need a proportioning valve or is it built into the master cylinder? I currently have the brake lines hooked up directly to the MC (there is a F & R label) but have not driven the jeep yet and want to make sure I don't flip around when trying to stop.
     
    Dgroshek, May 2, 2019
    #1
  2. Dgroshek

    Dgroshek Member

    Just in case anyone is wanting to use the brake master cylinder & booster setup and has front discs and rear drums, there is one additional part you will need. It's a GP valve; a proportioning valve part # 0098396. It is attached at a 45 degree angle in line on the rear brake lines. I've ordered it and when I install I can post pictures if anyone is interested.
     
    Dgroshek, May 3, 2019
    #2
  3. Jrobz23

    Jrobz23 Member

    I’ll take a look tomorrow and see what’s on there.
     
    Jrobz23, May 4, 2019
    #3
  4. Jrobz23

    Jrobz23 Member

    Where is this thing? I poked around it today and didnt see one.
     
    Jrobz23, May 15, 2019
    #4
  5. Dgroshek

    Dgroshek Member

    Here is a picture from the Roxor website. It's in the red circle. I figure it would be on the driver side frame rail? Don't know for sure - Don't own one.

     
    Dgroshek, May 15, 2019
    #5