1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

M170 Cj6 Frame The Same?

Discussion in 'Early CJ5 and CJ6 Tech' started by fyrmn, Oct 11, 2018.

  1. fyrmn

    fyrmn Member 2023 Sponsor 2022 Sponsor

    Is an m170 and cj6 frame basically the same? Would a cj6 body fit on a m170 frame w/o modification? Thanks
     
  2. Keys5a

    Keys5a Sponsor

    The frames likely would interchange, but the military frames usually have more braces and gussets, plus the front of the M170 should have the shackles reversed. I expect a CJ6 tub would easily fit on a 170 frame.
    -Donny
     
  3. FinoCJ

    FinoCJ 1970 CJ5 Staff Member

    I don't know the specific answer, but if it works I think that would be a pretty sweet, best of both worlds, set-up.
     
  4. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    I presume it would. Likely only minor differences. The M38A1 frames are the same as the earliest CJ-5 frames except the mil frames are stronger. And they have a machine gun mount!

    Both the earliest CJ-5 frames and the mil frames have shackle reversal.

    Do you have a line on an M170 frame or is this just speculating? M170s are pretty scarce.
     
  5. fyrmn

    fyrmn Member 2023 Sponsor 2022 Sponsor

    Just speculating another project. I have a line on a m170 but the body is toast.
     
  6. mpc

    mpc Member

  7. wasillashack

    wasillashack Member

    I used a Commando frame on my CJ6, I expect Commando frames and M170 frames are very similar, never seen an M170 frame in person. Commando frames are fully boxed, end to end, and pretty much a bolt in proposition. Good luck!
     
    Rich M. likes this.