1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Rear Seat Belts

Discussion in 'Early CJ5 and CJ6 Tech' started by Johns1967CJ5, Sep 25, 2018.

  1. Johns1967CJ5

    Johns1967CJ5 Sponsor

    Anyone have the placement for the rear seat belt mounts and how long the rear seat belts have to be ?
     
    Johns1967CJ5, Sep 25, 2018
    #1
  2. ojgrsoi

    ojgrsoi Retired 2024 Sponsor 2023 Sponsor 2022 Sponsor

    I used this one from Omix for the rear seat. 60" seems long but it works well.
    Seat Belt, 2 Point, 60 Inch Long; 41-95 Jeep CJ/Wrangler YJ

    I used the threaded holes in the floor on my 65 & 67. If I remember correctly they looked factory. I don't remember drilling holes. You can maybe see the bolt in the rear corner - drivers side in this photo.

    [​IMG]
     
    ojgrsoi, Sep 26, 2018
    #2
    Rick Whitson likes this.
  3. liquids

    liquids Old Member

    I took this pic last week when I was visiting my my project. Pretend you don't see the spilled paint from decades past. This is a late '68 with factory belts I believe. I just wish I had the seat they go with.
     

    Attached Files:

    liquids, Jul 30, 2019
    #3
    ojgrsoi likes this.
  4. Keys5a

    Keys5a Sponsor

    Liquid's photo shows the correct rear seat belt mount locations. Just make sure to reinforce the locations with a backing plate.
    -Donny
     
    Keys5a, Aug 1, 2019
    #4
  5. WYOMIKE

    WYOMIKE Oct 1971 pic

    Mike

    upload_2019-8-1_10-57-11.png

    [​IMG]
     
    WYOMIKE, Aug 1, 2019
    #5
    liquids likes this.
  6. liquids

    liquids Old Member

    Thanks! Interesting, the belts are still there but the seat hold down brackets aren't.
     
    liquids, Aug 2, 2019
    #6