1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Dauntless Water Ports

Discussion in 'Early CJ5 and CJ6 Tech' started by rejeep, Sep 14, 2018.

  1. rejeep

    rejeep Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    aside from the obvious one, what other ports have people used for electric fans, gauges etc..
     
    rejeep, Sep 14, 2018
    #1
  2. 70cj5134f

    70cj5134f Member

    Are u referring to water jacket ports for sending unit?
    Don't understand the ?
     
    70cj5134f, Sep 14, 2018
    #2
  3. rejeep

    rejeep Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    you understood perfectly...
     
    rejeep, Sep 14, 2018
    #3
  4. 70cj5134f

    70cj5134f Member

    Not familiar with u r engine, but aftermarket makes water necks with ports, for most engines.
     
    70cj5134f, Sep 14, 2018
    #4
  5. Warloch

    Warloch Did you say Flattie??? Staff Member

    Intake will make a difference - what are you running? The Offy and Kenne Bell have different port options - two usually close to the Tstat housing.
     
    Warloch, Sep 14, 2018
    #5
  6. rejeep

    rejeep Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Stock everything.
    I guess I’m going to have to make a manifold in a sense from the rear heater hose port...

    I don’t see that coming out easy...
     
    rejeep, Sep 16, 2018
    #6
  7. 47v6

    47v6 junk wrecker! 2023 Sponsor 2022 Sponsor

    I have tried to take out the stock fitting from the stock intake. It just broke off. Maybe heat and penetrating oil might make it happen.
     
    47v6, Sep 16, 2018
    #7
    zinertia2 likes this.