1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Drag Link Part

Discussion in 'Intermediate CJ-5/6/7/8' started by B-Rad, Aug 11, 2018.

  1. B-Rad

    B-Rad Member

    Hello, working on my 75 Cj5, I have it all back together from replacing the steering box. When I go to tighten up the drag link to the pitman arm it just spins. So I need just the end piece that can be adjusted with the sleeve. Is it the same thing as a tie rod end? Trying to get one today so I can drive it. Thanks
     
    B-Rad, Aug 11, 2018
    #1
  2. Oldriginal86

    Oldriginal86 Member

    Should be the same if the steering is all stock. Be sure to check if it’s right or left hand threaded.
     
    Oldriginal86, Aug 11, 2018
    #2
  3. David Littleton

    David Littleton New Member

    Some times just putting a little pressure on the end just to push it in the link (hole) with a bottle jack and try to tighten it it will grab the pitman arm and tighten.
     
    David Littleton, Aug 12, 2018
    #3
  4. B-Rad

    B-Rad Member

    THanks, finally got it on
     
    B-Rad, Aug 13, 2018
    #4