1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Drivers Entry Panel

Discussion in 'Early CJ5 and CJ6 Tech' started by adams77, Mar 18, 2018.

  1. adams77

    adams77 Member

    F4A29A8F-1190-4D3D-BC92-D29639966699.jpeg Do any of you know where I can get a repair panel for just the entry area. As you can see in the picture that part has been removed. I don’t want to replace the entire side, just the portion above the gas filler access hole.
     
    adams77, Mar 18, 2018
    #1
  2. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    It does not rust typically. Too difficult for most amateurs to fab. I would look for a donor that I could cut a piece out of. Send a picture to say J&W in Antelope CA. They likely have a body they can cut that section out of. Maybe other yards too... Any year CJ-5 or CJ-6 would do.

    Another option would be to purchase the panel and cut out the part you need. Try Classic Enterprises.
     
    timgr, Mar 18, 2018
    #2
  3. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    timgr, Mar 18, 2018
    #3
  4. adams77

    adams77 Member

    adams77, Mar 18, 2018
    #4
  5. ojgrsoi

    ojgrsoi Retired 2024 Sponsor 2023 Sponsor 2022 Sponsor

    ojgrsoi, Mar 18, 2018
    #5
  6. Rick Whitson

    Rick Whitson Detroit Area 2024 Sponsor 2022 Sponsor

    What Tim says. Looks like someone got tired of bagging their butt getting out. People have to learn how to "Dismount" from a CJ 5, or you will bang your butt. I wish I would have kept my donor Jeep just so I could have helped members with that sort of pieces. I did keep the edges of my old fenders so I could fill in the side marker lights on the reproduction fenders.
     
    Rick Whitson, Mar 19, 2018
    #6