1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Have Disc Brakes And Stock Looking Wheels & Tires?

Discussion in 'Early CJ5 and CJ6 Tech' started by Focker, Apr 26, 2017.

  1. Focker

    Focker That's a terrible idea...What time? Staff Member

    I've read about the clearance issues with disc brakes and stock wheels. I'm curious to see what some of you have...What you found to work and how you did it?

    This is an example of the type of wheels and tires I'd like to have. I found this image from Google.
    [​IMG]
     
    Last edited: Apr 27, 2017
    Focker, Apr 26, 2017
    #1
  2. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Quite a bold red!
     
    timgr, Apr 26, 2017
    #2
  3. Glenn

    Glenn Kinda grumpy old man Staff Member

    Are you looking to buy that?
     
    Glenn, Apr 26, 2017
    #3
  4. ITLKSEZ

    ITLKSEZ Hope for the best, prepare for the worst

    On the contrary... it looks like he's looking to build that out of his!
     
    ITLKSEZ, Apr 26, 2017
    #4
  5. Jrobz23

    Jrobz23 Member

    The Jeep in my sig had clearance issues in 15s. I sheared the heads on the retainer bolts off. I found very flat counter sunk-kinda head screws to fit in place after the swearing and welding fest got the old ones out. I think I have enough gap. It's REALLY close. I would avoid 15s if you have your eyes on late 70s CJ5 style brakes. I run 79, 2 bolt setup on my NT D30. Perhaps a TON of dish in the wheels can work too, but I wanted the tucked look.
     
    Jrobz23, Apr 26, 2017
    #5
  6. Focker

    Focker That's a terrible idea...What time? Staff Member

    No.

    It's posted as an example of the type of wheels and tires I'd like. Found it on Google.
     
    Focker, Apr 27, 2017
    #6
  7. Focker

    Focker That's a terrible idea...What time? Staff Member

    I have disc brakes. I'd like to run wheels that are more stock in appearance and with the tall skinny tires.
     
    Focker, Apr 27, 2017
    #7
  8. montanacj

    montanacj Member

    That is a good look I'm interested to see what others say. My 55 has those pizza cutter tires, I.e. Small and narrow. intersting, that red jeep has a motorcycle rack on the front bumper.
     
    montanacj, Apr 27, 2017
    #8
  9. jwinsley

    jwinsley Windblown

    Look at my profile photo, I have 4 wheel disc, the front axle is a dana 30, the rear are geo tracker/sidekick disc if I remember correctly. The rims are slightly wider than typical CJ rims but 15". 30x9.50r15
     
    jwinsley, Apr 27, 2017
    #9
  10. Focker

    Focker That's a terrible idea...What time? Staff Member

    Any larger pics?
     
    Focker, Apr 27, 2017
    #10
  11. Glenn

    Glenn Kinda grumpy old man Staff Member

    Locate some newer, AMC era stock wheels?
     
    Glenn, Apr 27, 2017
    #11
  12. GeoffreyL

    GeoffreyL Well-Known Member

    run a 3/4'' spacer?
     
    GeoffreyL, Apr 27, 2017
    #12
  13. Broylz

    Broylz Member

    small spacer is what i was going to recommend as well
     
    Broylz, Apr 27, 2017
    #13
  14. piffey263

    piffey263 Active Member

    Last edited: Apr 28, 2017
    piffey263, Apr 27, 2017
    #14
    Focker likes this.
  15. jwinsley

    jwinsley Windblown

    [​IMG]
     
    jwinsley, Apr 28, 2017
    #15
    Focker likes this.
  16. schardein

    schardein Low Range Therapy

    What you need are the plain steel wheels from 76-86 era CJs. They look very similar and clear disc brakes and 11" drum conversions. That's what I'm running in my avatar pic.
     
    schardein, Apr 28, 2017
    #16
    Focker likes this.
  17. colojeepguy

    colojeepguy Colorado Springs

    Just FYI, that's the wrong bolt pattern for a Jeep.
    I'm sure they have the correct wheel, but don't order that part #
     
    colojeepguy, Apr 28, 2017
    #17
    Focker likes this.
  18. piffey263

    piffey263 Active Member

    Yeah that is the wrong everything. It was just meant to be shown that the style is offered.

    I would recommend figuring out 15 or 16 inch rim, back spacing, number of lugnuts and spacing for lug nuts
     
    piffey263, Apr 28, 2017
    #18
  19. Focker

    Focker That's a terrible idea...What time? Staff Member

    Thanks guys.
     
    Focker, Apr 28, 2017
    #19