1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Fuel Line Recommendations

Discussion in 'Early CJ5 and CJ6 Tech' started by shaun, Mar 24, 2017.

  1. shaun

    shaun Member

    I have a 62 m38a1 frame fitted with a v6 225. I installed a 1976 fuel tank in the rear instead of the under seat tank. Looking to run fuel lines, vent lines, pump, etc. Can I keep my existing pump and what lines should I get? Pre bent? Bend.my own little lost here.
     
    shaun, Mar 24, 2017
    #1
  2. txtoller

    txtoller Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    txtoller, Mar 24, 2017
    #2
  3. Focker

    Focker That's a terrible idea...What time? Staff Member

    Focker, Mar 24, 2017
    #3
  4. FinoCJ

    FinoCJ 1970 CJ5 Staff Member

    You can use same pump. I ran hard line for both fuel an return lines that I bent myself with a small hand tool. The flexible nylon line is easy to route as there is no bending necessary but might be a bit harder to connect to tank sendind unit nipples. I used a ventilating fuel cap so no vent lines or charcoal canister stuff to deal with. If you tank has additional vent nipples you can run a short bit of hose or nylon line directly from one to the other.
     
    FinoCJ, Mar 25, 2017
    #4