Tire spec. for 1971 CJ-5

I have the "Mechanics Manual" for the universal jeep 1956 and the tire spec. there are 6.00*16.
I need the same information about later CJ-5 model with the F134 engine (the last year model 1971 is the best).
If someone have a copy of that page it will help me a lot.
thanks
Ziv

 

I hope this helps Ziv. God bless you folks over there. My gut tells me its about to hit the fan.

Sorry if it is just links, I haven't figured out how to insert images with an android.

 

Thank you Homersdog.
Can you please take a picture of the cover or rhe inner page to see the name of that manual.
The reason I need this information - here there are some issues with tire size / jeep height regulations and there are no "auto-data" for those old models. If I have books / manuals / scanned pages I can show them to the appropriate regulators.
I hoped to find the 7.00*16 size in one of this pages, but I don't see them.

I will keep on collecting data from anyone who may have 1971 jeep cj-5 manuals.

Thanks again.
Ziv

 

Ziv,

You might want to try talking to member jpflat2a. At one point I think he had a lot of paper references. Maybe he has something?

I seem to recall you and I working on this issue a few years back, so you may have seen this already.

This is all I have, but I believe its from 1955. Probably not of much use, but 7.00*16 is listed as optional.

 

This manual is very old. Sorry for the sloppy looks. It does say "1965" but I know it covers jeeps up through 71 because it covers the dauntless, the rear fuel tanks, the smog pumps.

These are still available through kaiserwillys.com and other places.

 

http://www.kaiserwillys.com/product/1680/willys-jeep-literature-mechanics-manuals-parts-accessories

 

Ziv
same pictures with page number showing

 

Thank you all.

It seems that all manuals for the early cj-5s show all zises but not the 7.00*16 that I looked for.
The only place I found that show the 7.00*16 is the m38a1 (ORD 9 SNL G-....).

Because the 7.00*16 size is getting very hard to get lately, I hoped to learn more about original sizes from the manuals to be ready to the day I will have to change size and prove it is the right / allowed size to the regulators who should issue a permit for that change. One day when 7.00*16 will no longer be available, I will have to go 205/16 or 215/16 or something like that.

Once again, thanks for all the inputs. I will print them and save for the future.

Ziv