Doesn't matter if it's a 1 car garage or a 40x60 shop like mine. There is never enough room.
Gonna lay low on this one since I've been banned from 2 different forums cause they don't have a photochop sense of humor.:D
Stretch it!! I'm stretching mine but in the area of where you step through. I like the top one
True it is a scratch. 3/4 long, down about a 1/16 but I tell you it's d..n sore this morning. The end of the tool is blunt before the edge starts....
Should be worn when using deburring tools or any other sharp object. [IMG]
Just to add get the activator for the 3M tape also. It will make it stick even better.
That gonna work for you?
We have a 51 jeep here at work that gets towed everywhere. We just put the transfer case in neutral. Now in the 20 years I have been here I have...
1" [IMG]
You can shove it in at any position you want but remember if the caps are marked with a 1 it kinda sucks when you have a different plug wire on...
What was CO at idle?
Not really. You have to weld in a bung and then use a plug if you don't leave it in. Using then them at the tailpipe is inefficient. The only...
It's the same here but if it takes 5 minutes to adjust a screw they will do it rather than fail the vehicle, quote him, charge him a minimum and...
Separate names with a comma.