-
Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.Dismiss Notice
blalp!'s Recent Activity
-
blalp! liked Fireball's post in the thread 71 Wheeling Rig.
Been busy with other things, but did get the SmittyBilt seat on the driver's side too: [IMG] The ride quality is drastically improved...
May 28, 2024 at 6:06 AM -
blalp! liked 73 cj5's post in the thread 3b Act II.
I finally got another D18 for parts. I had purchased two F134s around 2019 or so and completely forgot about one of them and my buddy...
May 28, 2024 at 6:02 AM -
blalp! liked compostwerks's post in the thread 52 M38a1 Motor Pool Resto.
Well grandkids landed safely in Boston this AM. Very slowly working on a few things as their attention dictates. The oldest is 9 years...
May 27, 2024 at 7:21 PM -
blalp! liked FinoCJ's post in the thread '66 Trail Tux Build.
I went through this exact same decision quite a few years ago....the 4 speed swap was out of my skill range at the time, so i went with...
May 27, 2024 at 3:31 PM -
blalp! liked Norcal69's post in the thread '66 Trail Tux Build.
At this point the best advice is going to be to study the build threads of other successful 33” spring under jeepers here. FinoCJ Super...
May 27, 2024 at 3:16 PM -
blalp! liked Jon B.'s post in the thread '66 Trail Tux Build.
That’s a nice rig to finish building out! And, I like the way you write. Keep at it - the building, driving and writing. Jon B.
May 27, 2024 at 3:16 PM -
blalp! liked T. M.'s post in the thread '66 Trail Tux Build.
Between then and now, I've done a couple things to the Jeep. I threw on a temp gauge, put in some 3-point seatbelts (to make Dad...
May 27, 2024 at 3:15 PM -
blalp! liked T. M.'s post in the thread '66 Trail Tux Build.
I'll start at the beginning - early January of 2024. At this time I had been wanting a project car for a while, but I didn't think my...
May 27, 2024 at 3:13 PM -
blalp! liked Norcal69's post in the thread Barbie Jeep For My Uncle.......
While the front clip is at the paint shop I am adding a little storage space to the YJ-7. This shelf is made to bolt into a TJ, I...
May 27, 2024 at 3:05 PM -
blalp! liked PeteL's post in the thread 52 M38a1 Motor Pool Resto.
Not really - I was inspired by you to begin picking away at my M38. It's all one person stuff anyway, so far. Like stepping in an open...
May 26, 2024 at 1:33 PM -
blalp! liked compostwerks's post in the thread 52 M38a1 Motor Pool Resto.
Geeze, almost a month since my last post. Work has kept me busy but I'm taking advantage of the holiday weekend. Clutch and flywheel...
May 26, 2024 at 10:53 AM -
blalp! liked timsresort's post in the thread 44 Floater.
I removed the carrier from the housing, (a little loose on the preload btw) and knocked the pinion out. Cleaned out the housing and...
May 26, 2024 at 7:10 AM -
blalp! liked timsresort's post in the thread 44 Floater.
Picked up a nice little treasure. Dana 44 offset, 11"brakes, full floating axles with locking hubs. The price was right, so I dragged it...
May 26, 2024 at 6:24 AM -
blalp! liked Warloch's post in the thread Warloch's 63 Cj5 Build.
Short little update... Put the drive train back in the frame so I can work on finishing things up here - add a clutch pull, finish TCase...
May 26, 2024 at 5:29 AM -
blalp! liked timsresort's post in the thread Woodstock.
One last item to address before I go out on a test run this weekend. Last year after the overdrive installation, I was experiencing oil...
May 24, 2024 at 12:37 AM