Herm rebuilds overdrives, he does not make them as far as I know. Shims are not uncommon in rebuilt gear boxes of any kind.
He has a thread on the CJ2A page forum under member created parts, which you can view even if you aren't a member over there. He lists his contact...
Getting ready to rebuild one myself, and will be buying parts from "Vintage Jeeper" for the job. Sal also sells a dummy shaft for preloading the...
Last Saturday I pulled the transmission and transfer case of a CJ2A, not because of leaks, but because they needed replacement. Both did leak...
The transmissions are bad to leak from the front input shaft seal. This would cause transmission oil to drip out of the weep hole in bottom of the...
Problem with his test set up is these pumps are really designed to have fuel gravity fed into the inlet before it can really "suck" any fuel. So,...
I had tires like that on an M38 I owned 35 years ago. I think Coker has them under the Firestone branding.
I have two rebuildable blocks which I had taken to a machine shop to prep for builds but they only got to the point where the blocks went through...
Mike, I think you sorta missed the point. The carburetor has already been rebuilt, he took it to a shop for the rebuild. I think what was...
If worried about that you could leave the spring paw in place, but in isn't really needed, and those are almost always broken or missing anyway....
Not if you choose to manually adjust the brakes, which is no big deal and certainly a lot easier than the old style brakes with eccentrics for...
Finding parts for the old Wagner brakes is like looking for the proverbial needle in a haystack. The adjusters don't work very well anyway, but...
I am with Fireball, and have been wondering what you were going to do about a radiator ever since the picture of the cut made into the...
"it seems weird a new part would fail after only a month" Unfortunately the quality of many "new parts" on the market today is questionable, and...
I saw nothing in that to be offended by. Something being "archaic" doesn't mean anything negative to me. I am archaic myself.
Separate names with a comma.