1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

T90 clutch disk alighnment tool?

Discussion in 'Early CJ5 and CJ6 Tech' started by 1957Willys, Sep 29, 2012.

  1. 1957Willys

    1957Willys Member

    Where can I find a clutch disk alighnment tool for the T90 transmission in my 57 CJ5? I would like to find on that is made to fit the clutch disk not a universal one from NAPA or Advance.
     
    1957Willys, Sep 29, 2012
    #1
  2. WorkInProgress

    WorkInProgress Member

    WorkInProgress, Sep 29, 2012
    #2
  3. Stout

    Stout Member

    I have that exact one from NAPA. It is difficult to make work because the shaft diameter of your clutch is much smaller than most other clutches. I've only seen one exact tool advertised on the web: http://www.willysjeepparts.com/Clutch_Alignment_Tools.htm

    Actually, a spare transmission input shaft is the best thing to use if you happen to have one laying around.
     
    Stout, Sep 29, 2012
    #3
  4. EricM

    EricM Active Member

    x2
     
    EricM, Sep 29, 2012
    #4
  5. Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    x3
     
    Howard Eisenhauer, Sep 30, 2012
    #5
  6. johnsotd

    johnsotd Member

    If you are replacing the clutch there may be one included with the kit. My clutch had the alignment tool with it.
     
    johnsotd, Sep 30, 2012
    #6
  7. WorkInProgress

    WorkInProgress Member

    hopefully it would include the tool but the one i bought from vintagejeepparts.com did not come with the tool.
     
    WorkInProgress, Sep 30, 2012
    #7
  8. Stout

    Stout Member

    My kit did not come with a tool, either.
     
    Stout, Sep 30, 2012
    #8