1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Windshield Removal?

Discussion in 'Flat Fender Tech' started by oldie, Jun 5, 2010.

  1. oldie

    oldie New Member

    I need to remove the windshield from the frame on a 1948 CJ2A. It appears to me that it can be rotated out far enough so that the top frame of the windshield will clear the drivers side upright of the frame. Is this correct? It's been in storage for a loooong time and is a little rusty so I don't want to over-do any forcing to get it out for cleaning and repairs.

    Thanks,
    Wayne
     
    oldie, Jun 5, 2010
    #1
  2. 1963cj5

    1963cj5 Member

    Spray it with PB BLASTER first..work it in by rotating the windshield in & out..It will slid either way passenger side or drivers side..good luck
     
    1963cj5, Jun 8, 2010
    #2
  3. oldie

    oldie New Member

    Thanks, took me a while, but I finally got it out without destroying it.

    Wayne
     
    oldie, Jun 9, 2010
    #3
  4. unclebill

    unclebill Banned

    i was going to suggest a BFH but i guess you decided to do it the hard way.;)
     
    unclebill, Jun 9, 2010
    #4