1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

First impressions of the M38A1...

Discussion in 'Early CJ5 and CJ6 Tech' started by mruta, Oct 20, 2004.

  1. mruta

    mruta I drank with Billy!

    So I took delivery of my new old M38A1 yesterday. I really need to find the serial numbers to see if I can determine what year it was built. Anyway, I've noticed some interesting things that I never knew about them before.

    1) I heard the frame was boxed- they are though only in front of the front crossmember.
    2) There is no "JEEP" stamped in the sides of the tub.
    3) the floor under the fuel tank is much deeper... obviously for larger fuel tank.
    4) The firewall is flat and there is no hole where the heater is located on the ECJ5's
    5) The body mount locations are not the same. There appears to be additional bracing on the frame in back for the mounts. I'll get pics of this later today when I have it up on the lift.
    6) The frame has "loops" in it in 4 different places under the Jeep... I presume they are for tying it down while shipping.
    7) Lots of oddball brackets and holes present which aren't on my 5...

    That's all for now... lots more to come!!!
     
  2. blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Useless W/O PICS!
     
  3. BlueFlu

    BlueFlu past owner of some ecj5's

    Pics?
    Is this going resto or mod?
     
  4. mruta

    mruta I drank with Billy!

    Does restomod count as a valid answer? Not trying to dodge your question but I want it to still look like an M38A1 when it's done but it will definitely be modified....

    PICS ON THE WAY!!!!!
     
  5. jd7

    jd7 Sponsor

    Don't forget, crossmember for the Browning. :shock: :)
     
  6. BlueFlu

    BlueFlu past owner of some ecj5's

    Good answer. :)
     
  7. mruta

    mruta I drank with Billy!


    I almost forgot about that... There is a crossmember in the back which has a plate built into it specifically for mounting a weapon... though I thought it was for a 50 cal on the back.?.?.?....
     
  8. mruta

    mruta I drank with Billy!

    Pics shortly... Just as soon as it dries off. I just got done powerwashing the New Mexico mud off of it a few minutes ago. That was cool!
     
  9. jd7

    jd7 Sponsor


    .30 and .50 cal Browning among others :)
     
  10. blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

  11. gte636p

    gte636p Member

    did ya get the bows that fit in the triangles too?? to actually be able to use that weird space might be one of the neastest things about it when it get my stuff done...
     
  12. Boyink

    Boyink Super Moderator Staff Member

    Towel it off already!

    ;)
     
  13. dauntless_powered

    dauntless_powered SUB COB 2024 Sponsor

    is it dry????????????????/
     
  14. Mcruff

    Mcruff Earlycj5 Machinist

    He must be picking his butt or somethin, I've seen mollasses flow faster then him!!:D
    Come on already, we're growin old here (I think I feel my bones thinning)!!:)
     
  15. dauntless_powered

    dauntless_powered SUB COB 2024 Sponsor

    paint dries faster than his water
     
  16. BlueFlu

    BlueFlu past owner of some ecj5's

    Take a pic, who cares if its still wet.
     
  17. jd7

    jd7 Sponsor

    wets OK, will make it look shiny
     
  18. BlueFlu

    BlueFlu past owner of some ecj5's

    Well we are waiting.. Tapping foot.
     
  19. 66cj5

    66cj5 Jeep with no name

    body tag is located on the front of the pass side wheel well. as far as weaponry get a recoiless rifle. sure beats a machine gun, don't forget to get the different windsheild for it. (has a slot in it to hold the rifle in the travel pos)