1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

hand reamers

Discussion in 'Flat Fender Tech' started by timing light, Feb 28, 2010.

  1. timing light

    timing light New Member

    i was cleaning out the garage and found some stuff i did'nt know i had, brand new in the box , combined king bolt bushing reamer and driver -- plus a piston pin reamer , -- will work for 27-29 HUDSON, 28-32 PLYMOUTH. 30-32 DODGE, 37-39 WILLYS 4 cyl. -- will this work for the F head as well ?
     
    timing light, Feb 28, 2010
    #1
  2. Lifesgoodhere

    Lifesgoodhere Like 6 Jeeps isn't enough

    yeah it will the only difference in the f and l head engines is the head design
     
    Lifesgoodhere, Feb 28, 2010
    #2
  3. Jeepenstein

    Jeepenstein Me like Jeep.. 2024 Sponsor

    Holy crap batman.. talk about hidden treasure!!! I can't answer your question but certainly a great find!


    BUBBA
     
    Jeepenstein, Mar 1, 2010
    #3
  4. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Might work on a 2WD Jeep, like a Dispatcher or 2WD Utility Wagon. I believe this is for the pressed-in bushings in a beam front axle. A 4WD front axle does not have bushings like this; instead it has tapered roller bearings.

    Piston pin reamer might work. The rods have a pressed-in bushing that needs to be reamed to fit the piston pin.
     
    timgr, Mar 1, 2010
    #4
  5. SIDSCJ

    SIDSCJ Jeep addict

    Might work on a Ross box rebuild too. Usually have to doctor the bushings to fit the shaft.
     
    SIDSCJ, Mar 1, 2010
    #5