1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Today's Mystery Question- Engine Mount Bracket

Discussion in 'Early CJ5 and CJ6 Tech' started by Howard Eisenhauer, Oct 8, 2004.

  1. Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    O.K.- What's this dooey on the bottom of my driver's side engine mount bracket for? Never noticed it before I got the frame cleaned up but I'm pretty sure it musta been there all along.

    Thanks,

    Howard.
     
    Howard Eisenhauer, Oct 8, 2004
    #1
  2. Glenn

    Glenn Kinda grumpy old man Staff Member

    The flexible brake hose goes through there to anchor it in place. The big part will stop it from going through, then a little clip goes on and holds it in place. At least I think it's for that. Now I need to look at mine and see where it's at on that side.
     
    Glenn, Oct 8, 2004
    #2
  3. gte636p

    gte636p Member

    flexible brake hose line? it needs to go from hard frame line to a hard axle line somewhere... why not there?

    glenn beat me to it...
     
    gte636p, Oct 8, 2004
    #3
  4. Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Doh!

    H:).
     
    Howard Eisenhauer, Oct 8, 2004
    #4
  5. Hippo393

    Hippo393 Jeepless

    Is that what the hurricane engine mount looks like??
     
    Hippo393, Oct 9, 2004
    #5
  6. Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Well, one of them does :).

    Let me know if you want a picture of the other side, it's a little different.

    H.
     
    Howard Eisenhauer, Oct 9, 2004
    #6