1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Where can i get info on rebuilding the amc 20?

Discussion in 'Intermediate CJ-5/6/7/8' started by ehauff, Sep 9, 2004.

  1. ehauff

    ehauff What? What? What?

    Need e real good walk through with specs on rebuilding the amc 20 and dana 30. Got new gears and plan on installing them this weekend but cant find any info on it. thanks in advanced.
     
    ehauff, Sep 9, 2004
    #1
  2. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    The factory manual is usually the best.
     
    timgr, Sep 9, 2004
    #2
  3. plunkinberry

    plunkinberry Member

    I went to yahoo and googled ring and pinion install and found a LOT of information. Give a read and look at the factory manual too. An additional source of info. might be whereever you purchased the gears from...

    And, as always, ask away... there's a wealth of knowledge available here at ECJ5.

    Good luck.
     
    plunkinberry, Sep 9, 2004
    #3
  4. sparky

    sparky Sandgroper Staff Member Founder

    Randy's Ring and Pinion website would be a good source of info I'd think.
     
    sparky, Sep 9, 2004
    #4
  5. lynn

    lynn Time machine / Early CJ5 HR Rep Staff Member

    lynn, Sep 9, 2004
    #5