1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

need Hei conversion help

Discussion in 'Early CJ5 and CJ6 Tech' started by willysworker, Aug 11, 2004.

  1. willysworker

    willysworker Member

    I'm at the last part installing a 225 v6 H.E.I. distributor. A.J.S.'s Rich Motts instructions call for installing a limiter cam that is suppose to come with the aftermarket adj. Vac. diaphragm. I don't know what he is talking about. My Moroso kit doesn't seem to have a cam limiter to install. Anyone know what's up. I'm wondering if I should be looking at another brand. Anybody have experience with this. Help!
     
    willysworker, Aug 11, 2004
    #1
  2. Project71-5

    Project71-5 BACON

    I converted an even fire 79 HEI to odd fire and put it in. I did not use the adj. vac. advance kit nor did I change out any weights. It works great :)
     
    Project71-5, Aug 11, 2004
    #2
  3. Warloch

    Warloch Did you say Flattie??? Staff Member

    Only use those IF NEEDED... I have not had to use them in the 2 others I have done (now I'm jinxed). Only thing is neither was a Moroso kit - one OF I rebuilt, one EF I converted.

    See how she runs first... BTW - your check's in the mail.

    :stout:
     
    Warloch, Aug 11, 2004
    #3
  4. willysworker

    willysworker Member

    Thanks for your replies gents. I'm sure the tech author had something in mind. He just didn't get it across to me. I tried the A.J.C. forum site but it's really dead. Doesn't look like much help coming from them. I checked my total advance at 3,000 rpms and it's less than 35 ,which he says it's OK. I'll run with it like this awhile and watch out for a lean condition. thanks again
     
    willysworker, Aug 13, 2004
    #4