1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

One tough cookie!!! Dana 27

Discussion in 'Early CJ5 and CJ6 Tech' started by DanStew, Aug 1, 2004.

Page 2 of 2
  1. 66cj5

    66cj5 Jeep with no name

    that stuff will unstick anything!
     
    66cj5, Aug 2, 2004
    #21
  2. mb82

    mb82 I feel great!

    or break it R)
     
    mb82, Aug 2, 2004
    #22
  3. JohnyJeep

    JohnyJeep BLOWING A XING NEAR U@2AM

    I had a hard time with mine. I squirted some oil into my impact gun to help it out hydraulically. :shock: :shock: :shock: Worked good :D :D :D
     
    JohnyJeep, Aug 3, 2004
    #23
  4. willysnut

    willysnut Banned

    Going fishing?
     
    willysnut, Aug 3, 2004
    #24
  5. W7YWF

    W7YWF New Member

    don't torch it! get a drummel tool and cut the thing off. it will take a few cutting wheels. a few can be as many as 30+, but they are really cheep to buy. cut the thing just till you almost hit the shaft. then do the same on the oppsit side. with a cold chesel speread the nut apart, it should break in two, if not put vice grips on it and turn it.

    My moto is if it don't wanta come off then drummel it!
    Mike
     
    W7YWF, Aug 4, 2004
    #25
Page 2 of 2