1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Tranny and t-case mounts

Discussion in 'Flat Fender Tech' started by Andy4802, Sep 15, 2008.

  1. Andy4802

    Andy4802 Canadian Jeep junkie

    my tranny and t-case mounts are both shot... i get a lot of lateral flex on them to the point that you can see my shifters move a LOT from side to side.
    I'm thinking of fabbing up some solid mounts for both out of them. i know the replacement mounts are dirt cheap but i would like something with no or less flex. Anyone see any issues with this? will it transfer too much stress to the frame?
     
    Andy4802, Sep 15, 2008
    #1
  2. Bill F

    Bill F Finally running

    You need flex in the mounts or you will break something
     
    Bill F, Sep 15, 2008
    #2
  3. lynn

    lynn Time machine / Early CJ5 HR Rep Staff Member

    Polyurethane mounts are much firmerthan rubber but still give when needed.

    OTOH if your current mounts are really shot, you might be surprised at just how firm new rubber mounts will hold your driveline. I installed a new rubber mount under the T18 that was in my CJ and was impressed with the difference.
    I don't think solid mounds are a good idea.
     
    lynn, Sep 15, 2008
    #3
  4. Andy4802

    Andy4802 Canadian Jeep junkie

    ok cool. good feedback :)

    who makes polyurethane mounts? i did a google search and didnt come up with anything
     
    Andy4802, Sep 15, 2008
    #4
  5. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Last edited: Sep 15, 2008
    timgr, Sep 15, 2008
    #5
  6. Andy4802

    Andy4802 Canadian Jeep junkie

    Andy4802, Sep 15, 2008
    #6
  7. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Look at their universal products. I searched for universal urethane transmission mount.
     
    timgr, Sep 15, 2008
    #7
  8. Andy4802

    Andy4802 Canadian Jeep junkie

    cool, thanks. I'll measure to see if one of those will work :)
     
    Andy4802, Sep 15, 2008
    #8