1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

'67 CJ5 Steering Bellcrank assistance.

Discussion in 'Early CJ5 and CJ6 Tech' started by Bam_cj5, Jun 29, 2004.

  1. Bam_cj5

    Bam_cj5 New Member

    Hello all! 1967 CJ5 V6 with stock steering setup.

    I need to rebuild/replace my steering bellcrank shaft. It measures 7/8". Here's my dilemma. I have found kits that don't specify engine size or type but I have also found kits that specify 4 cyl only (7/8). Can anyone give me some clarification? Can I just go by the size of the shaft or is there something else to these things?

    Thanks in advance!
     
    Bam_cj5, Jun 29, 2004
    #1
  2. John A. Shows

    John A. Shows Comic Relief

    All that I've seen either specify a 7/8" shaft or a 1-1/8" shaft.

    I had to check mine to be sure and I have a 1-1/8" shaft. I don't know if it's specific to a year model or not but mine's a '69.
     
    John A. Shows, Jun 29, 2004
    #2
  3. Boyink

    Boyink Super Moderator Staff Member

    Moved this to the on-topic section (unless I missed the eBay reference..)
     
    Boyink, Jun 29, 2004
    #3
  4. Glenn

    Glenn Kinda grumpy old man Staff Member

    I'd go by shaft size, then compare parts when you get them.
     
    Glenn, Jun 29, 2004
    #4
  5. Jeepenstein

    Jeepenstein Me like Jeep.. 2024 Sponsor

    I've got one for sale if ya need it.. I think it is the larger one.. i'll measure it later today..

    BUBBA
     
    Jeepenstein, Jun 29, 2004
    #5