1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

1967 Jeepster Body Rebuild

Discussion in 'Jeepster Commando and Commando Tech' started by grubby, Apr 24, 2006.

  1. grubby

    grubby New Member

    I recently purchased a 1967 Jeepster, that by reading about them has the normal rust problems. I have a couple of questions:
    1) Does anyone know of a company that sells patch panels for the area behind the rear wheel openings.
    2) I've seen some of the Jeepsters that appear to have plastic fender flares on them. Is this something you can purchase or are they adapted from a different model.

    I'm new to Jeeps. I have basically been an IHC and Dodge man so any suggestions on websites or books would be greatly appreciated.

    Thanks,
     
    grubby, Apr 24, 2006
    #1
  2. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Don't know about the patch panels, but I would suspect not. It's mostly flat - good opportunity to learn metal work. The 'glass flares were aftermarket; again I doubt they are available any more. Parts support for the Jeepsters is very thin, except for the parts they share with CJs.
     
    timgr, Apr 24, 2006
    #2
  3. junkfood

    junkfood Member

    Most of the flares your seeing are TJ or YJ flares.. They look good but do require some metal cutting.. For the sheetmetal parts try www.justjeepsters.com/

    Keith
     
    junkfood, Apr 24, 2006
    #3