T14 rebuild tools!

While cleaning out the garage awhile ago I ran across the aluminum and PVC dummy shafts that I made to put the needle bearings and such back in the T14 when it is rebuilt, for anybody contemplating the rebuild of there T14 and needing such if you send me a PM I will pass these shafts on for there use, when someone else needs them pass them on or if you don't want to keep them mail them back to me.

 

I know it's been a long time but do you still have the shafts or do you happen to know who might. Got a 71 T-14 needs a new mainshaft and bearings.

Thanks

Todd

 

Todd,

I still have most of my T14 rebuild kit (no shafts or gears), if not all of it, available.

I bought it and later opted not to rebuild my T14 since I have the dauntless setup with the longer input shaft and such... my mainshaft was toast and it cost more for me to rebuild that thing than it would have to go with a cheap SM420 and an adaptor.

I'll try to remember to check the garage tonight and see if I still have the bearings and small parts...

Edit- just saw this was a sticky post, my apologies... if you see this and still need a T14 kit, let me know... I'll probably post it up on the classifieds or something.

 

I could use the tools if their still around
Jeff

 

Are the T-14 rebuild tools still around anywhere?

 

These about by chance?