1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Axle parts

Discussion in 'Jeep Trailer Tech' started by MOP, Sep 12, 2005.

  1. MOP

    MOP Active Member

    I searched the Bantam Trailer group page and for some reason could not find a concrete answer. What axle model can I search under to find nuts/seals/bearings/races/etc. for my BT3C? If someone already has a list of part numbers that would work for me too.
     
    MOP, Sep 12, 2005
    #1
  2. jpflat2a

    jpflat2a what's that noise?

    unless it has been changed/replaced by PO, I think you will find out that everything you are asking about above is the same as CJ2A, 3A, and early CJ5. This would include the hub assy, bearings, races, seals, etc.
    sorry I don't have any FLAPS numbers for you.
     
    jpflat2a, Sep 12, 2005
    #2
  3. wheelie

    wheelie beeg dummy 2024 Sponsor 2023 Sponsor

    When I needed seals, I asked the NAPA dude to check under 1950 CJ and the seal worked nicely. All the nuts and stuff are common with the Dana 25, I"m pretty sure, as are the bearings and seals. Bearings should have a # on em to reference to. Spindles might have to be fabbed from CJ pieces. I think the 25 and 27's shared many of these parts. Anybody confirm? NAPA seal number 21101 worked on mine.
     
    wheelie, Sep 13, 2005
    #3
  4. schardein

    schardein Low Range Therapy

    I have some of this info at home on the computer, but I won't be hooked to the internet till Monday (D**m adelphia!)

    Think I have part numbers for the seals and bearings/races.

    What everyone is saying is right, early Cj front axle pieces. Leaf springs are flat fender jeep fronts.
     
    schardein, Sep 14, 2005
    #4