1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

No Aussie Lockers for a D25 or D41?

Discussion in 'Flat Fender Tech' started by w3srl, Jul 25, 2005.

  1. w3srl

    w3srl All-around swell dude Staff Member

    This suc*$. I just realized that they don't make an Aussie Locker for the Dana 25 or Dana 41. Don't get me wrong, I understand the whole supply/demand gig, but I'm still disappointed.

    Guess a Lock-Rite is my only option for either axle.... :mad:
     
    w3srl, Jul 25, 2005
    #1
  2. Jeepenstein

    Jeepenstein Me like Jeep.. 2024 Sponsor

    I've got lock rites, you'll be happy with them if you are ok with the locker quirks....

    BUBBA
     
    Jeepenstein, Jul 25, 2005
    #2
  3. BlueFlu

    BlueFlu past owner of some ecj5's

    Steve they are almost the exact same thing. ;)
     
    BlueFlu, Jul 25, 2005
    #3
  4. neptco19

    neptco19 That guy....

    I believe you'll be completly satsified with the lock rites. Like Jerry said they are built basically just like a lock rite :beer:
     
    neptco19, Jul 25, 2005
    #4
  5. blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    I inquired with Aussie when I was doing mine and they cared so much as to not get back to me.....so right then and there I decided to say no to their product.

    I did the lockright do your self a favor and go to Randys and not Krage (unless Krage has them in stock (yea right)).

    Seems Randys is the main supplier and unwilling to sell to the littler guys like Krage and Bob Suplee.I had to contact lockright directly and have everything ready for Randys to drop ship it to me. HTH
     
    blevisay, Jul 25, 2005
    #5
  6. MOP

    MOP Active Member

    They don't make one for a D27 either....though they did respond to my inquiry.
     
    MOP, Jul 25, 2005
    #6
  7. Jeepenstein

    Jeepenstein Me like Jeep.. 2024 Sponsor

    I got both mine from Summit racing.. it took them a little longer to get them (2 weeks) but as always summit took care of me..


    BUBBA ;)
     
    Jeepenstein, Jul 25, 2005
    #7
  8. w3srl

    w3srl All-around swell dude Staff Member

    Yeah, but almost $100 bux sheeper. Per axle. :mad:
     
    w3srl, Jul 25, 2005
    #8
  9. BlueFlu

    BlueFlu past owner of some ecj5's

    Just a side note on Randy's R&P. They now have an east coast place as well. They ship from it and you can pick parts up at a will call counter.
    Its in Cool Springs which is between Brentwood and Franklin TN.

    So Billy there yet another reason to get up here. :D
     
    BlueFlu, Jul 25, 2005
    #9