1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Dana 18 Shifter Handle Modification

Discussion in 'Flat Fender Tech' started by jeeper50, May 17, 2023.

  1. jeeper50

    jeeper50 jeeps 'till I die

    20230425_182505resised.jpg Resized_20230509_081956.jpg Resized_20230509_082005.jpg During a recent lull in the jeep schedule, I decided to install a couple of spent shells on my shifter handles. A coworker of mine made me two adapters to fit into the 20mm shell casings with a threaded 5/16" x 24 TPI hole. Anyway here's several pics of the mod.
     
    jeeper50, May 17, 2023
    #1
    Twin2, givemethewillys, Jw60 and 4 others like this.
  2. dnb71R2

    dnb71R2 SuperDave 2023 Sponsor

    Look at that security feature on the tranny shifter! (y)
     
    dnb71R2, May 17, 2023
    #2
    vtxtasy likes this.
  3. Jeepenstein

    Jeepenstein Me like Jeep.. 2024 Sponsor


    Yeah, that's gonna get pirated for my CJ as well.. That's simple and to the point.
     
    Jeepenstein, May 17, 2023
    #3
    Danefraz likes this.
  4. jeeper50

    jeeper50 jeeps 'till I die

    I figured with the 420 in first gear, if they get it started its not moving away too fast. Just nose it up to a post or building. Not completely foolproof but maybe just enough to have them move on...
     
    jeeper50, May 18, 2023
    #4
  5. givemethewillys

    givemethewillys Been here since sparky ran it. 2022 Sponsor

    So cool!
     
    givemethewillys, May 18, 2023
    #5