1. Tip...
    When posting in Classifieds, you can choose from the following menu prefixes in the Thread Title: For Sale, WTB or Free.
    Click on the X to dismiss this notice.
    Dismiss Notice
  2. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice
Prefix Tip Registration Trouble

For Sale Price Lowered V6 Buick Power Steering Bracket And Pump

Discussion in 'Early CJ-5 and CJ-6 Classifieds' started by Norcal69, May 8, 2023.

  1. Norcal69

    Norcal69 Out of the box thinker 2024 Sponsor 2023 Sponsor 2022 Sponsor

    I consider this to be the "mid height" power steering pump mount. Higher than some as it bolts completely to the cylinder head, but lower than the actual high mount setup. Works with HEI distributor.
    Included is a "keyway shaft" power steering pump and pulley.
    Pump condition is unknown, has oil in it that will be drained before shipping. The bracket is two pieces and consists of the rear mount made of aluminum and front mount made of steel.
    No hoses will be included in sale.
    $75 plus the ride.


    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    Norcal69, May 8, 2023
    #1
  2. FinoCJ

    FinoCJ 1970 CJ5 Staff Member

    Guessing that does not work with a front dump manifold?
     
    FinoCJ, May 8, 2023
    #2
  3. dnb71R2

    dnb71R2 SuperDave 2023 Sponsor

    My research always pointed to the 3-piece high position bracket to clear the front dump manifold. That's what I'm using.
    However, I'm not sure I ever considered this mid height bracket arrangement.
     
    dnb71R2, May 8, 2023
    #3
  4. Norcal69

    Norcal69 Out of the box thinker 2024 Sponsor 2023 Sponsor 2022 Sponsor

    I have a complete Dauntless v6 here with front dump manifold attached and a short section of exhaust pipe in place......
    Think engine removed with a sawzall.....
    I can see if it will bolt up if you like.
     
    Norcal69, May 8, 2023
    #4
    FinoCJ likes this.
  5. FinoCJ

    FinoCJ 1970 CJ5 Staff Member

    If you think there is much chance of it fitting, go for it....but just looking at mine with front dump and fuel pump etc - I don't think there is a chance.
    [​IMG]
     
    FinoCJ, May 8, 2023
    #5
  6. Keys5a

    Keys5a Sponsor

    I think this pump/mount was used originally on the 350 Buick V8 back in the ‘70s.
    -Donny
     
    Keys5a, May 8, 2023
    #6
  7. Norcal69

    Norcal69 Out of the box thinker 2024 Sponsor 2023 Sponsor 2022 Sponsor

    I mocked it up on my spare engine.
    At first it looked like it might fit, but it misses clearing by about 1".
     
    Norcal69, May 8, 2023
    #7
  8. Norcal69

    Norcal69 Out of the box thinker 2024 Sponsor 2023 Sponsor 2022 Sponsor

    I think your correct.
    The steel bracket is stamped 350-455
     
    Norcal69, May 8, 2023
    #8
  9. FinoCJ

    FinoCJ 1970 CJ5 Staff Member

    thanks for checking....the hose connections on the back of the pump don't look to help with clearance...
    but for somebody with headers or rear dump manifold on driver side, it would be a pretty sweet set-up.
     
    FinoCJ, May 8, 2023
    #9
  10. Norcal69

    Norcal69 Out of the box thinker 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Bump

    Price lowered to $50 plus the ride.
     
    Norcal69, May 24, 2023
    #10
  11. 71CJ54WD

    71CJ54WD Sponsor

    PM Sent
     
    71CJ54WD, May 25, 2023
    #11
  12. Norcal69

    Norcal69 Out of the box thinker 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Sold
     
    Norcal69, May 25, 2023
    #12