Looking For A 1 Inch Body Lift

I have a 71 cj 5 and was wondering if any body knows of a good company that offers a 1 inch body lift.

 

Drill out hockey pucks for the body bushings?

 

Using “Energy Suspension’s” body mounting kit for vintage cj5’s will give you close to 1”
They are 3/4” high

 

On an early CJ you have to be concerned about the pedals and steering column.

 

Been done many times by many people, including me.

 

Or buy a stick of polyurethane and make your own any height you want. It's a bit tough to cut but if you get a stick of PVC pipe the right diameter for a sacrificial offering, it cuts well with a fine tooth blade in a miter saw where you have good control over the length.

 

https://www.universalurethane.com/urethane-round-rod-stock

 

That is the vendor I bought most of my urethane rod from. It's one item McMaster-Carr has that is really way more expensive. Polyurethane rod is useful for all sorts of things including spring and shackle bushings.

 

I buy allot of products from these guys.
They currently make a rod that is 2" OD and 1/2" ID. They will make it in 95 Duro (hardness) and whatever length you want.
https://westernroller.com/products/poly-tube/

 

The rollers for a boat trailer already have a hole through them. Could slice them on a bandsaw to whatever thickness desired.

 

I used the Daystar pucks with fender washers top and bottom on my 2a and plan to use them on my 71 CJ5 as well. They're about 3/4" I think and drilled for a half inch bolt. $30 on Amazon, easy peasy.

 

Haha I use to have tons of them laying around when I use to play not so much any more though.....

 

I picked up a piece of 1" thick nylon from my local plastics dealer for. Used my hole saw to make the pucks. I have found many uses for it.