1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Where To Get Spring Hangers Bushings

Discussion in 'Early CJ5 and CJ6 Tech' started by Montgomery J Yarbrough, Sep 23, 2021.

  1. I have a 1971 cj5 and have purchased new spring hangers I was wondering if anyone know where to get the bushings and metal sleeves for them all I can find is bushings for the leaf springs themselves thanks
     
  2. jeepdaddy2000

    jeepdaddy2000 Active Member

    There are three bushings per spring. Two in the spring eyes and one in the hanger. All three are the same bushing.
     
  3. Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

  4. Keys5a

    Keys5a Sponsor

    You may find the "silent block" OEM bushings to a real pain to remove/replace. Often, the rubber part and inner sleeve can be pressed out, but the outer sleeve sometimes has to be relief cut to remove. They can be pressed in with a big vice, or a long threaded bolt and socket, but this can be challenging too.
    I still prefer the original bushing to the aftermarket urethane ones.
    -Donny
     
  5. Thanks I sorta was thinking the spring eye bushings were the same *** the hangers but I figured I better come on here and ask