1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Spindle To Knuckle

Discussion in 'Early CJ5 and CJ6 Tech' started by Jonbbrew, Sep 4, 2020.

  1. Jonbbrew

    Jonbbrew Member

    Hello all,

    Can someone please confirm that there is not a seal nor need for gasket maker between the Knuckle and the Spindle...

    As always, Thanks!
     
    Jonbbrew, Sep 4, 2020
    #1
  2. Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    I wouldn't use a paper gasket there
    a thin layer of permatex is what I use
     
    Twin2, Sep 4, 2020
    #2
    mike starck likes this.
  3. Jonbbrew

    Jonbbrew Member

    Which type?
     
    Jonbbrew, Sep 4, 2020
    #3
  4. PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    #2 Permatex, non-hardening, is my go-to for almost everything.
     
    PeteL, Sep 4, 2020
    #4
    Rick Whitson, Twin2, Jonbbrew and 1 other person like this.