Manual Hubs

Does anyone know where I can get the parts for the inside of my hub,I cant seem to find them anywhere. I am looking for parts 6 thru 13



Thanks in advance

 

Where is the picture from? What year/model is your Jeep, and who made the hubs?

Kinda suspect that you won't find any parts support unless someone has a broken hub to part out. Again, more specific info might help.

 

If those are some of the AMC Jeep factory hubs for a dana 30, there are some used ones Ebay.

Jeep CJ 1976-80 Factory Dana 30 6 Bolt Locking Hubs Pair -- CJ5 CJ7 | eBay

 

It looks like the original poster has a cj5 1973

 

It is a cj5 73, with a dana 30 front end. I found the picture on the internet, but I cant find any parts. They look like the ones on the ebay link

 

Were you ever able to find out what these hubs were? Mine are the same and I'm missing parts as well. I haven't even been able to find what brand these are. The diagram helped big time though!

 

Diagram looks like the 5 bolt hubs for the 81-86s jeeps,

'81-'86 CJ Heavy Duty Locking Hubs (5 bolt)

no parts but here are hubs

 

I get all my hard to find parts from Items for sale by mojeep5 | eBay. Just contact him very good at getting parts

 

Could be the 5-bolt hub in the above drawing. The '74-80 parts book shows similar hubs for the CJ in the Special Equipment section, so that style must have also been supplied for 6-bolt hubs. The book says these were made by Warn. As I recall, starting in 1974 you could get hubs as a factory-installed option. Where I worked, they did not order these with the Jeeps but instead installed the regular Warn aftermarket hubs when requested at delivery.

Back in the day, according to the book you could only order the clutch assembly (half of everything), the cap assembly (the other half of everything), or the service kit (tab washers etc). Kinda think you may as well replace the whole hub if you have to buy one half or the other of the hub to get the parts you need.