1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Ramsey Pto Lever Stuck

Discussion in 'Winches' started by Scott Graham, Mar 6, 2020.

  1. Scott Graham

    Scott Graham New Member

    I'm new to a lot of this. My jeep has a Ramsey PTO on the front. I have yet to try to run it because I am unable to spool it out. The lever seems to be frozen. I'm assuming it should move freely (and there isn't some sort of release that I'm missing)? Any tips on how to get it unstuck?
     
    Scott Graham, Mar 6, 2020
    #1
  2. Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    The only thing it could be is that the dog clutch that the lever/fork moves back & forth on the shaft is rusted in place.

    Ramsey winch Rebuild
     
    Howard Eisenhauer, Mar 6, 2020
    #2
    J walk and Scott Graham like this.
  3. PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Some PTO winch controls can jam up under stress if the mounting points are not firmly torqued and well aligned.

    More likely corrosion or dry grease/crud though.
     
    PeteL, Mar 6, 2020
    #3