1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Eastwood Scroll Compressor

Discussion in 'The Tool Shed' started by Steve's 70-5, May 12, 2019.

  1. Steve's 70-5

    Steve's 70-5 Active Member

    Bought a Eastwood Scroll Compressor, was questioning the cost, but pulled the trigger and bought one. Hooked it up a couple weeks ago, just ran it long enough to fill the tank. Did some work in the garage today and used the compressor. This thing is quite, while the compressor was running I could still hear the radio playing in my small garage. A few time while I was running a saw, I did not hear the compressor start up and run. Glad I bought it.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    Steve's 70-5, May 12, 2019
    #1
    timgr, ITLKSEZ and Focker like this.
  2. Admiral Cray

    Admiral Cray I want to do this again.. Staff Member

    I installed a big Scroll Compressor for a machine shop. It made a lot of air, but was a little nosy...

    It did draw a lot of electricity...
     
    Admiral Cray, May 14, 2019
    #2
  3. Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member


    :beer:

    Can I have when you die? :whistle:
     
    Howard Eisenhauer, May 14, 2019
    #3
    Twin2 and ITLKSEZ like this.
  4. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Pretty cool.

    Since it's "portable" I'd worry about theft. Maybe a bicycle lock to a loop set into the floor? Unlikely my conventional compressor will be stolen...
     
    timgr, May 16, 2019
    #4
  5. Steve's 70-5

    Steve's 70-5 Active Member

    I have a air supply line from the compressor attached to the wall to the regulator. It weights 300-400 pounds would take a lot to lift up.
     
    Steve's 70-5, May 16, 2019
    #5