1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

225 Intake Manifolds- Map Of Fittings

Discussion in 'Early CJ5 and CJ6 Tech' started by Chuckman, Feb 24, 2019.

  1. Chuckman

    Chuckman New Member

    so Ive got two intake manifolds to choose from. One has a port passengers side rear. otherwise theyre the same. whats the difference between them?
     
    Chuckman, Feb 24, 2019
    #1
  2. RATTYFLATTY

    RATTYFLATTY I think you need a little more throttle

    Are they stock or aftermarket? My aftermarket Offy didn't have one in the rear but all the stockers I've seen have the rear port.
     
    RATTYFLATTY, Feb 24, 2019
    #2
  3. colojeepguy

    colojeepguy Colorado Springs

    Is it a vacuum port or coolant?
     
    colojeepguy, Feb 24, 2019
    #3
  4. Chuckman

    Chuckman New Member

    dunno couldnt figure that out
     
    Chuckman, Feb 24, 2019
    #4
  5. RATTYFLATTY

    RATTYFLATTY I think you need a little more throttle

    Pics would be good about now
     
    RATTYFLATTY, Feb 24, 2019
    #5
  6. Rich M.

    Rich M. Shoe salesman 2024 Sponsor 2023 Sponsor 2022 Sponsor

    You may have an of 231 manifold with the Pcv valve in the manifold. Pics....
     
    Rich M., Feb 24, 2019
    #6
  7. Tomellen

    Tomellen Member

    Mine is stock with port on rear pass side. hose from this goes to heater core on derivers side fire wall at least that's the way it is on mine. Front port goes to 2nd heater core connection.
     
    Tomellen, Feb 24, 2019
    #7
  8. Chuckman

    Chuckman New Member

    thx guys. I'll post up pics of the two when I can
     
    Chuckman, Feb 24, 2019
    #8