1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Roxor - Ox Locker

Discussion in 'Roxor Tech' started by 1957Willys, Sep 25, 2018.

  1. 1957Willys

    1957Willys Member

    One is in development here is a display. They are supposed to be 19 spline so it might be able it fit a stock Dana 44 in a Willys.
     
    Last edited by a moderator: Sep 26, 2018
    1957Willys, Sep 25, 2018
    #1
  2. jeepstar

    jeepstar Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Wish more descriptions accompanied this video
     
    jeepstar, Sep 26, 2018
    #2
  3. 1957Willys

    1957Willys Member

    There are some other posts on the Roxor swing pedal post. It would be great if those were moved here so they don't high jack the swing pedal post.
     
    1957Willys, Sep 26, 2018
    #3
  4. Focker

    Focker That's a terrible idea...What time? Staff Member

    I'm not sure Roxor threads even belong in CJ5 Tech, but I'll move things around.
     
    Focker, Sep 26, 2018
    #4
    71CJ54WD likes this.
  5. jeepstar

    jeepstar Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Maybe start a sticky on off topic? It would Cover the roxer parts to cj usage for future generations of cj people?
    We have a nice source of new, off the shelf swinging pedal assemblies and seats that closely mimic the originals.

    Personally i like the seats better than oem lowbacks, strictly for the head rest for if you get rear-ended. Ok, ok. And for the price too!
     
    Last edited: Sep 26, 2018
    jeepstar, Sep 26, 2018
    #5
  6. PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    EarlyRoxor.com?
     
    PeteL, Sep 26, 2018
    #6
    Muzikp likes this.
  7. Daryl

    Daryl Sponsor

    I look at these Roxors as more Jeep then anything built since at least 87.
     
    Daryl, Sep 26, 2018
    #7
    montanacj, dane71 and colojeepguy like this.
  8. 1957Willys

    1957Willys Member

    Going by the parts catalog the axles are 19 spline.

    ROXOR Offroad
     
    1957Willys, Sep 27, 2018
    #8
  9. garage gnome

    garage gnome ECJ5 welder

    This would open up more possibilities for the early jeeps. Might need a full floater kit though because I think the two piece might break.
     
    garage gnome, Sep 27, 2018
    #9
  10. Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Interesting to go through the parts & see what have prices listed & what don't- I'm guessing they only list the price after someone actually orders something & the factory has to determine the price point.

    So far I'm seeing pricing on the pedal assembly, seats, sway bars & spring packs. All at *very* attractive prices. :)

    Looking at the xfer case parts it looks like an overdrive is not in the cards :( Where we would expect a bull gear to be sitting on the tranny output shaft there's a shaft assembly with what looks like an integral bull gear & a bearing in the cover plate.

    [​IMG]

    ROXOR Offroad
     
    Howard Eisenhauer, Sep 27, 2018
    #10
  11. 1957Willys

    1957Willys Member

    Ok I was thinking about the ox locker and how it would work in a early CJ axle. My question is are the cross shaft pins removable in a ox locker so the spacer can be installed so the axle bearings can be preloaded?
     
    1957Willys, Sep 30, 2018
    #11