1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Where To Find Pto Parts Dana 18h

Discussion in 'Flat Fender Tech' started by 7jeeps, Jun 19, 2018.

  1. 7jeeps

    7jeeps New Member

    IMG_3733.JPG I need to get a replacement lever for a Dana 18 H
    or if anyone's fabbed one I'd appreciate pointers
     
  2. melvinm

    melvinm Member

    Try Herm He Should have one.
     
  3. 7jeeps

    7jeeps New Member

    He only has plate and pin kits
     
  4. william_cj3b

    william_cj3b 3BOB driver

    Harry Sheets might have one.
     
  5. garage gnome

    garage gnome ECJ5 welder

    That looks easy enough to make.
     
  6. 7jeeps

    7jeeps New Member

    Any contact info?
     
  7. 7jeeps

    7jeeps New Member

    How much for you to make me one? I can come up with plates, pin, and knob.
     
  8. Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Considering what these go for on ebay it might be cheaper just to buy a complete unit.
     
  9. william_cj3b

    william_cj3b 3BOB driver

  10. jeep2003

    jeep2003 Well-Known Member

    I made one up for you if you still need it. even with a correct knob
     

    Attached Files:

    Daryl likes this.
  11. 7jeeps

    7jeeps New Member

    I ended up buying a whole pto but an extra shifter to throw on the shelf probably isn't a bad idea
    How much and do you take PayPal?
     
  12. 7jeeps

    7jeeps New Member

    I've never seen a shifter by its self but pto's without shifters go very cheap
     
  13. 7jeeps

    7jeeps New Member