1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Opinions Wanted On Odd Cj Tail Gate Picture

Discussion in 'Intermediate CJ-5/6/7/8' started by shaun1300, Mar 12, 2018.

  1. shaun1300

    shaun1300 New Member

    I would be interested in knowing if anyone has seen a similar tail gate area on anther CJ. You can tell from the forward area it was mounted to tub since the fasteners are showing. It appears to be a manufactures piece from the look of it, by that i mean not home made. I got this parts vehicle among a bunch of other parts I bought from the same person. Its too bad it was so cold when I took this picture my hands were too numb to clean more snow off or shot photos of inside of tub. When I get it home I can shoot some more photos. Thanks in advance Shaun1300
     

    Attached Files:

    Keys5a likes this.
  2. Daryl

    Daryl Sponsor

    The whole back of that tub appears to have been fabricated.
     
  3. shaun1300

    shaun1300 New Member

    I agree. I am just wondering who made the part and what for since I dont see any storage what was the idea/purpose.
     
  4. Glenn

    Glenn Kinda grumpy old man Staff Member

    My first thought is maybe there wasn't a specific purpose, it's just the way someone made it.
     
  5. Keys5a

    Keys5a Sponsor

    The whole tub from beyond the dashboard back has been built in a backyard by Bubba. It might be a bit more solid than the wood rear tubs I used to deal with. Even the steering wheel (2 spoke?) looks like it may be from a Willys pickup/wagon.
    -Donny
     
  6. sterlclan

    sterlclan Member 2024 Sponsor 2022 Sponsor

    i have an 3a that looks surprisingly like that and i know bubba built the one i have
     
  7. shaun1300

    shaun1300 New Member

    Thanks for all the input. I may post more pictures when weather clears and I have it home. Shaun1300
     
  8. shaun1300

    shaun1300 New Member

    I was able to find out more about rear body from PO. He was a mechanic at Anchor Marina on Grand Island in NY. The Jeeps were used as tugs by workers there to haul boats and other stuff around marina. He was not sure when the back ends were put on but it was before he started work there. I believe I am getting 3 like this once the snow clears up and we can load them on my trailer. I will be better able to see condition of bodies once the 5" of snow is off them. I was able to get a couple pictures of one of the 7 CJ's i bought from him and will attach it. One CJ wheel well had a tool bracket holder mounted probably to hold screwdrives, pliers and such. I also included a a picture of a 1/2 hardtop that I got as part of the jeeps and parts. Now I need to find window gaskets to mount glass. I did get one small gasket, but need another and one for large back window. Anyone know where they might be available? Needless to say my wife will be thrilled with 7 more Jeeps and a truckload of parts. shaun1300
     

    Attached Files:

  9. Willy

    Willy New Member

    Tell her that one of those is her future Jeep.

    Looks like a decent haul. Should be able to resurrect a few of those.