1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Rebuilding A 74 304, Waterpump Trouble

Discussion in 'Intermediate CJ-5/6/7/8' started by bigj, Jul 7, 2017.

  1. bigj

    bigj New Member

    New waterpump on 304 is about 1/4 to 3/8s longer than old, added pully and it is too shallow to line up with the rest, belts wont run like that...Parts store only list one for 304.. this was obviousely like this originally. any ideas?
     
    bigj, Jul 7, 2017
    #1
  2. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    The FSJ guys like the GMB aluminum pump, IIRC. Lots of discussion on the FSJ sites. site:fsjnetwork.com water pump - Bing

    If it does not fit, take it back. Try a different supplier. All 74/75 Jeep V8s are the same, Jeep PN 8125131. PN changes for '76, but the book does not say why it's different.
     
    timgr, Jul 7, 2017
    #2
    bigj likes this.
  3. sterlclan

    sterlclan Member 2024 Sponsor 2022 Sponsor

    Ive run into this, had one that didn't line up , ordered one for a 73 304 and it lined up, it was a gmb brand pump.fwiw the wrong pump was on it when i got the 304 and had been run like that only off by a half inch or so made for short belt life.
     
    sterlclan, Jul 8, 2017
    #3
    bigj likes this.
  4. bigj

    bigj New Member

    Good friends with my local carquest, after an hour long search, they are sending my old one out for rebuild.
     
    bigj, Jul 10, 2017
    #4