1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Outboard spring hangers.

Discussion in 'Builds and Fabricators Forum' started by BlueFlu, Mar 12, 2005.

  1. BlueFlu

    BlueFlu past owner of some ecj5's

    Thinking of ditching the offset D44 and the axle I'm thinking on has wider spring pads.
    Anyone have pics of outboard hangers?
     
    BlueFlu, Mar 12, 2005
    #1
  2. DanStew

    DanStew Preowned Merkin salesman Staff Member

    Here are some pics i have been saving up. I am going to do the one that the guy boxed it in. Pretty much it is a piece of angle iron that is boxed in. I am going to also run a piece of plte that will weld to the bottom of the angle and to the bottom of the frame. A bit over kill but will work. Only problem i have been thinking about is the steering, you will have to notch holes in the side and sleeve it and run the montuing bolts throguh the outboard spring mount.
     
    DanStew, Mar 12, 2005
    #2
  3. Hippo393

    Hippo393 Jeepless

    I have a pic but can't seem to find it now. Will when I get back later tonight or tomorrow. :beer:
     
    Hippo393, Mar 12, 2005
    #3
  4. 53Flattie

    53Flattie Intigator

    Here's what I made for the Flattie. The upper part is (obviously) angle iron with two gussets. It bolts to the frame with 5 bolts. The lower half is a box I made by welding two pieces of angle together, then closed in the ends with flatbar. I mitered the ends, just for looks. It bolts to the upper half with 5 bolts. The reason I made them seperate is b/c I thought I might convert to YJ springs sometime in the future, which would require a wider lower mount.
     
    53Flattie, Mar 13, 2005
    #4
  5. BlueFlu

    BlueFlu past owner of some ecj5's

    Thanks guys. ;)
     
    BlueFlu, Mar 14, 2005
    #5
  6. Hippo393

    Hippo393 Jeepless

    This is from a DJ frame I have behind the shop. Obviously not as nice as Tim's & Dan's :shock:.
     
    Hippo393, Mar 14, 2005
    #6