1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Anyone Using The Novak 225 V6 Headers With A Power Steering Conversion

Discussion in 'Early CJ5 and CJ6 Tech' started by 71CJ5Renegade, Jun 15, 2017.

  1. 71CJ5Renegade

    71CJ5Renegade 71cj5RenegadeII

    71CJ5Renegade, Jun 15, 2017
    #1
  2. Warloch

    Warloch Did you say Flattie??? Staff Member

    I helped design them with Eric from Novak - you can see how they fit on my 'test' rig at warloch.com. One thing to point out, the Red '51 has a body lift on it, but I have installed them on several other riggs (including my neighbor across the street) in stock height configurations. They work fine for Saginaw manual or power setups.
     
    Warloch, Jun 15, 2017
    #2
  3. Muzikp

    Muzikp Active Member

    I second the pictures would be nice part. Would love to see pics of these installed. I didn't know those existed til I clicked the link, might consider buying those. I hate my fenderwell headers. If anybody wants some fenderwell dump headers to trade for stock manifolds or anything that doesn't dump where these do hit me up.

    [​IMG]
     
    Muzikp, Jun 16, 2017
    #3
  4. masscj2a

    masscj2a Member 2023 Sponsor

    warlock, do you have any pics to post here ? I have a 62 I am putting a Dauntless in and would like to do PS, and push type slave clutch in. Wondering if these headers will work for me.
     
    masscj2a, Jun 16, 2017
    #4
  5. Warloch

    Warloch Did you say Flattie??? Staff Member

    I'll see if I can bring some over and capture the set installed on my neighbors across the street. It will be after the 4th before I can get them though...

    You can see them on my site with THIS LINK if you want.
     
    Warloch, Jun 18, 2017
    #5
  6. masscj2a

    masscj2a Member 2023 Sponsor

    Cool, that showed me some good views. So not too close to the starter issues and what did you do about the steering column?
     
    masscj2a, Jun 18, 2017
    #6
  7. Warloch

    Warloch Did you say Flattie??? Staff Member

    The rig with the pics has a body lift on it. You can clear it with a bit longer column (this is an after market column). If your stock height, it's not an issue to clear most Saginaw installs.

    I didn't do the testing for Manual steering - I think Eric was working on that.

    It does have good clearance for starter - one of the main things I had problems with on the first test run from Saunders.
     
    Warloch, Jun 20, 2017
    #7
  8. masscj2a

    masscj2a Member 2023 Sponsor

    Thanks
     
    masscj2a, Jun 21, 2017
    #8
  9. 71CJ5Renegade

    71CJ5Renegade 71cj5RenegadeII

    Thanks for the reply and the pictures....looks like the steering for my 71 and 55 will interfere.

    Picture with Orange is the 71 other two are from my 55
     

    Attached Files:

    71CJ5Renegade, Jul 1, 2017
    #9