1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Soft Top Identification

Discussion in 'Early CJ5 and CJ6 Tech' started by mayday, May 27, 2017.

  1. mayday

    mayday Sponsor

    When I get home I'll lay out top and measure it out.
     
  2. fctex

    fctex Sponsor

    It looks like there is a black label on the upper right rear window of the top in the first pic.
     
  3. Keys5a

    Keys5a Sponsor

    That what I thought at first, but a closer look, it appears to be a rectangular strap hook. I think I can see the shadow of 3 more under the flap. Maybe to strap the rear flap in the rolled position, or for straps that run down to the tailgate?
    -Donny
     
  4. jpflat2a

    jpflat2a what's that noise?

    Yes, two up top to roll the window up.
    4 down lower for straps to footman loops.
     
  5. jpflat2a

    jpflat2a what's that noise?

    Same top on my Jeep in 3A/M38 version IMG_2626 (2).JPG
     
    mayday likes this.
  6. mayday

    mayday Sponsor

    Do your doors look like mine? Nice looking jeep by the way!
     
  7. jpflat2a

    jpflat2a what's that noise?

    No.
    Zipper upper windows only.
    Understand those doors could be purchased separately.
    Zipper failure and wear and tear meant buying new doors if the top was okay.
    If you look to the right of my wife, you might be able to see where the body bends in towards the cowl, above the step.
    3A/M38 top would have this same bend in the lower door frame.
    It's not on the CJ5 doors, they should be flat, with multiple snaps along the leading edge to the body.