1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Bearing Race Removal Tip

Discussion in 'The Tool Shed' started by Focker, Mar 16, 2017.

  1. Focker

    Focker That's a terrible idea...What time? Staff Member

    Just came across this...Thought I'd share.

     
    Focker, Mar 16, 2017
    #1
  2. tarry99

    tarry99 Member

    Your can also just weld a short bead on the bearing race surface 180 degrees apart...........the weld shrinks the race and most times will just fall out.
     
    tarry99, Mar 16, 2017
    #2
    Danefraz, Twin2 and Daryl like this.
  3. Jeepenstein

    Jeepenstein Me like Jeep.. 2024 Sponsor

    Yup, we do this with many of our press fit bushings in the turbine world.. Then we get to play with Liquid Nitrogen to get them back in..
     
    Jeepenstein, Mar 16, 2017
    #3
    Twin2 and tarry99 like this.
  4. PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Vern is a living legend in the Flathead Ford world, BTW.
     
    PeteL, Mar 17, 2017
    #4