1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

HySteer

Discussion in 'Builds and Fabricators Forum' started by 4x4chevette, Jan 19, 2005.

  1. 4x4chevette

    4x4chevette Member

    Ive decided to go with the hysteer. Here is my design, and rmyers will be makign ti for me.

    Bare with me its done in paint.

    [​IMG]

    [​IMG]

    I will be using 1ton chevy rod ends, and now have the montecarlo steering box installed... with this setup ill be so near to parral shouldnt ahve no bump steer.

    You may notice the drag link is set up to go behind the tierod, which isnt typical. Thats becuase the monte box has a longer pitman arm which shoves it back farther, and with it there, it puts it to an almost stright line with the pitman arm, and it cna still turn 100% of its radius.
     
    4x4chevette, Jan 19, 2005
    #1
  2. DanStew

    DanStew Preowned Merkin salesman Staff Member

    you making the arm yourself?? What are you using??
     
    DanStew, Jan 19, 2005
    #2
  3. 4x4chevette

    4x4chevette Member

    Having a buddy that owns a machine shop make them... HAvent gotten as far into details as what they will be amd eof etc yet... im leavign that up to him, he does this stuff for a living and knows the strengths and weaknesses.
     
    4x4chevette, Jan 20, 2005
    #3
  4. DanStew

    DanStew Preowned Merkin salesman Staff Member

    thats one good buddy :)
    Sounds like it will work out just fine
     
    DanStew, Jan 20, 2005
    #4
  5. Goose

    Goose New Member

    I built the hysteer for my Dana 44. I used some 1" thick plate for my arms. What front end are you putting this on and are you SOA?
     
    Goose, Jan 28, 2005
    #5
  6. 4x4chevette

    4x4chevette Member

    Its a closed 30, and yes im soa... not much use for hysteer without....
     
    4x4chevette, Jan 28, 2005
    #6