Prairie city in Folsom area. I want to go up to the Sierra here in a few weeks to take it through some nice trails. There is a few things that I...
Finally got to take her out for some good fun!!! We were out wheeling for about 5hours and everything went great! http://youtu.be/fmJ4r5W6zk0...
.1/2 inch NPT pipe plugs from local auto parts store. .84 blazer calipers and backing plate. .brake pads, bolts, brake lines, rotors(78 cj) and...
I replaced the calipers with some off of a 84 blazer. They fit like a glove!!! Took it out today and love it!
^ Thanks guys! I thought it would be done by now but I ran into a problem... The bleeder screws on the caliper where rounded(I got the calipers...
Update: just about finished with disk brake conversion!!! Just need to bleed the brakes. [IMG]
Great info!
Perfect! thank you all very much. There is local jeep yard close to home so I'll go check.
Bump.
I'm looking to purchase a rear bench seat for my 69 cj5 here in the near future. Where would you guys recommend I get one from?
Does the frame mounted MC need to be upgraded when doing the disc conversion?
Not sure wich is the vacuum line. Is this the vacuum line? [IMG]
I had the timing set at 5° BTDC before and I would get a lot of back fire, it sounded like the engine wanted to die and would take a bit to start...
I am trying to figure out where to set the timing on my dauntless 225. I bought a timing gun and I have it set right where the red mark is on the...
Separate names with a comma.