-
Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.Dismiss Notice
timsresort's Recent Activity
-
timsresort liked Rozcoking23's post in the thread Lost Oil Pressure.
The teeth on the cam gear are fine, no wear no damage. I’m thinking the distributor came unseated just enough to allow the male/female...
May 21, 2024 at 10:57 PM -
timsresort liked Ol Fogie's post in the thread Lost Oil Pressure.
Sounds like at least a removal of the timing cover to examine the gears and oil pump shaft for free movement plus clean out any metal...
May 21, 2024 at 10:57 PM -
timsresort replied to the thread 44 Floater.
Yes, the spindle could be installed over the 1.220 outer spline. But what a PIA if you broke one and had to disassemble the whole thing...
May 21, 2024 at 10:41 PM -
timsresort liked duffer's post in the thread 44 Floater.
I ran that exact arrangement in my 3B for decades with both a Powr-Loc and Detroit and both 11" drums and discs. Zero problems behind...
May 21, 2024 at 10:22 PM -
timsresort liked Ol Fogie's post in the thread 44 Floater.
This is going to be a good thread! (y),I am learning a lot. I appreciate your time posting. :watch:.
May 21, 2024 at 10:21 PM -
timsresort liked Cj5dale's post in the thread Transmission And Transfer Case Oil.
https://www.dbsupply.com/harvest-king-api-service-gl-4-ep-sae-90-gear-oil-2-gal.html
May 20, 2024 at 10:10 PM -
timsresort replied to the thread Transmission And Transfer Case Oil.
Thank you Pete. That is informative. This thread is important, for me, considering that I can't attest to what is actually in any of my...
May 20, 2024 at 9:45 PM -
timsresort liked PeteL's post in the thread Transmission And Transfer Case Oil.
Read this if you want information rather than opinion. https://www.widman.biz/uploads/Transaxle_oil.pdf
May 20, 2024 at 9:38 PM -
timsresort liked WYOMIKE's post in the thread Transmission And Transfer Case Oil.
You could be very correct, I admit I am no expert on the subject. But as hard as it is to find parts anymore and sense at my age I don't...
May 20, 2024 at 9:37 PM
-
timsresort replied to the thread 44 Floater.
The shafts are 1.250 and the spindles are 1.260, so .010 comes out of the spindle to pass the fattest part through, then there is a...
May 20, 2024 at 9:35 PM -
timsresort liked Johns1967CJ5's post in the thread My 67 CJ5 build.
Ahhh, ☀️ summer [img]
May 20, 2024 at 8:51 PM -
timsresort liked wheelie's post in the thread The B3 3b Attempt.
Got the bolt on stuff removed from the frame today. The axles are original to my '71 and will find their way back to it. The Rancho lift...
May 19, 2024 at 9:53 PM -
timsresort replied to the thread 44 Floater.
But then you have all that extra stuff to go wrong, air lines, compressors, solenoids, o-rings, switches, fuses. Seen it way too much on...
May 19, 2024 at 9:44 AM -
timsresort liked Jw60's post in the thread 44 Floater.
The index needs turned down to 2.875 for tapered axle housings and I *think* the major diameter for the 19 spline is 1.313".
May 18, 2024 at 10:58 PM -
timsresort replied to the thread 44 Floater.
Oh, yeah, the selectable locker. I forgot about that. Guess you can't get a 19 spline ARB.
May 18, 2024 at 10:47 PM