Thanks, we've been talking about that.
After seeing your post, we went back and installed the sock, as I believe you're dead on about sacrificing tank volume without it. Yes, it is a...
I have a vented cap and the filler neck that Twin2 posted earlier, so that should work, right? Also, there's no need to use the sending unit sock...
[ATTACH] Thanks so much for the thorough response!!! Here's a pic of the original cluster. I'm assuming it was original for the '62? It looks...
That's a good point. We've increased the distance the fuel will have to travel quite substantially. Any thoughts on any of my other questions?
The filler inlet and vent are on the right hand side of the picture (driver side for reference), and I'm pretty clear on them. I have the same...
I know there's probably a million threads about this, but I'm not getting my questions answered through my research so far. As the title says,...
Okay, so this is what the "after" pics look like. I appreciate all the information, and I wanted to get back with you all after repairs were...
Also, I believe what I'm getting from ya'll is that originally, these were all studs in the exhaust manifold and valve cover? Like I said, mine...
https://www.permatex.com/products/thread-compounds/thread-sealants/permatex-high-temperature-thread-sealant/ How about this? Looks like it's just...
So the consensus here then is to use Permatex #2 on the threads when I bolt everything back up and we'll be good to go? I'm notorious about...
Yeah, that's not my work. I've never seen RTV used in that kind of application. I'm going to remove it. Thanks.
[ATTACH] [ATTACH] I'm referring to the valve cover on the side of the block. Here's a pic. In the second one you can see the blue RTV and...
Hello, this is my first post. New to the forum obviously, and think I have a unique issue, but if it's been discussed before, please let me know....
Separate names with a comma.